1. Cross-chain bridge
The preferred recommended official Cross-chain bridge:
Fee 0.01, minimum Cross-chain amount 0.011e
Alternative third-party Cross-chain bridges include:
HOP costs around 0.021e
https://goerli.hop.exchange/#/send?token=ETH&destNetwork=linea&sourceNetwork=ethereum
LI.FI jumper
This is an aggregation type Cross-chain platform, it has hop, and the hop fee after aggregation is about 0.011e here
https://testnet.jumper.exchange/
Multi Multichain
The Cross-chain handling fee is 0.1%, the minimum fee is 0.01e, and the minimum Cross-chain amount is 0.1e
https://test.multichain.org/#/router
So to sum up, the best Cross-chain is the official bridge.
2. Uniswap DEX
Main operation: swap/pools
Convert any ETH to crusdc and form a Liquidity pool of ETH /crUSDC
Pay attention when adding the pool, because the amount of crUSDC in linea is too large, so when adding the highest exchange rate, you must fill in a very high amount before you can enter the recharge amount. The best way is to keep adding a number and keep adding Until the recharge amount can be filled
Then enter a very small amount of ETH, and the corresponding ratio will automatically appear below. It is already hard to figure out what unit to use to measure it. . The screen ratio of uniswap is out of balance, and then approve, preview, and add it. If you can’t add it, just click Add. If the little fox does not pop up, then go to ETH and add 2 0s in the middle. Withdraw 10% or 20% of the pool, and the operation of uniswap is completed, and then come back from time to time to perform swap/pools (transaction/pool) operations.
3. FWDX DEX
FWDX is a decentralized P2P exchange platform that offers firm offers and zero price slippage
Main operations: water/swap/pools
You can get water here in the faucet, choose the token you want to get, and then enter the amount, and click mint.
Then add our pool, select two currencies to add, the ratio is not fixed, you can enter the number at will, the test network does not have a limit on the number, then select the time the pool exists, and then authorize the contract used by the token, and then click One time is OK.
The last thing is to choose a pool in the market for token exchange. The one I chose is the ETH/USDT trading pair. I pay 1 ETH and get 1818 USDT. After selecting the token, I will confirm the payment.
If you are doing it for the first time, the steps of exchanging and adding pools require two-step confirmation. The first step is to authorize tokens, and the second step is to confirm the transaction!
Then here you can see the pool I created
You can also see the tokens I have exchanged, and you can exchange them several times
Anyway, it doesn’t cost money, interact regularly
4. Echo DEX Echo
Main operations: swap/pools/claim NFT
Make a swap transaction first, select a trading pair in the middle, enter the amount of ETH, and exchange ETH into the corresponding token
Then add the flow pool pool, which is the two tokens just exchanged
Finally get an NFT, just get it directly
Five, mesprotocol
Main operations: deposit/trade/sell/withdraw
First deposit ETH to mesprotocol
Sell ETH after the balance is updated, and then buy it again. I don’t have enough funds here so I won’t demonstrate it
You don’t need to take all of them out, just leave a little e here, and come over to interact every other week or two
6. cashmere cashmere Multichain Cross-chain protocol
CashmereLabs a protocol for Cross-chain swaps secured by MEV. Any asset between any chain, with the best price
Main operation: Multichain Cross-chain
Choose to Cross-chain a small amount of funds from linea to Goerli
There are not many operable ones. Just come and find two networks to operate Cross-chain after a while. It was selected as a project of BinanceLabs and deployed on L0 at the same time.
7. NFTs2Me NFT collection/mint
Main operation: mint/create collection
Open the link below and you can mint directly. One mint is an interaction once. Don’t have multiple mints at a time, and mint one by one at a time
https://0x99bf1924c58ac41ed94ace2d3ce4f334af3fa1c6_59140.testnet.nfts2.me/
https://0x6ded0b8f47c234012d0c588edb2d0982ca116cfe_59140.testnet.nfts2.me/
I just tried to create a collection, there seems to be a problem, try again after a while
Open the link above and select
Approximate configuration see picture
Then deploy it
After the deployment is complete, there will be a project on the home page, click on it, select the minting page, and save this address, that is, when others visit this address, they can come to mint, and they need to set some things before others can mint, and now they can’t mint. Scroll down to the bottom of the minting page and save the settings.
Get the exclusive mint link, you can only open the mint page through the specified link
If you get the mint address, you can’t mint now. First, go to mint settings and change the maximum number of each address. The minimum is 1, and 0 means you can’t mint. Then you can set the maximum number as you like. In the following stage, you need to change it to Public (open), only open, everyone can play, and you can also try the pre-sale whitelists function if you have time. Then save the settings. By accessing the previous link, you can access the collection created by mint yourself.
Eight, ghostchain NFT market
Main operation: mint
https://airdrop.ghostchain.io/#/linea/0x98Fc97cF4095eC3895e3D761184EF105FB56631f
Just mint directly
Thanks for reading, the mirror document will be updated from time to time, and new content will be posted on Twitter after each update
Thanks for following my twitter twitter.com/zuoer0619 or manually follow search @zuoer0619
Project link collection instructions refer to Google Docs to suggest favorites in case of loss
https://docs.google.com/spreadsheets/d/1a7iH_u4DWw4gl0_DXmO2r2egTJMEXfx5XI6pZu5HV2M/edit#gid=0